A great line of pistols with a lot of fans. Make sure to visit Makarov Pistol Dot Com's fine site as well.
Teakwood Gunboards.Com Gold Star Member 1987 Posts Posted - 06/20/2004 : 08:32:27 AM ...
FIRRING PIN SPRING AND RECOIL SPRING TOOLS a plastic bag that you can see though and get both hands in hemostats tweezers dental pick MAKE...
Originally Posted by Stephen A. Camp: Hello. It's been my observation that within the handgunning community there exists a contingent of folks...
Originally posted by George @ makarov.com Russian *First Model Pistolet Makarova (PM) with frame cut out at top of triggerguard *Pistolet...
A request was made for a copy of the BATF(E) letter regarding which Makarovs are C&R. Here it is, courtesy of Arcom the First. SlimTim
(Copied this post from one of ScottB's, good reference material. -ST)
Just a reminder that the usual ground rules apply: 1) Be civil and courteous; watch your language. This is a family Forum, make sure your Language...
The following velocity tests of 64 varieties of 9x18 ammunition were completed using a Beta Chronograph set 7-feet from the muzzle of a 1985...
I'm changing computers and when I started to move over my bookmarks I recalled that in the old forum before data loss I listed all of the...
I was wanting to get into a small project and was thinking about buying a Makarov from Century Arms that is not complete and missing parts. Then...
I just bought an EG as a shooter/car pistol. Its trigger guard (#3176) does not match its BX 1414 serial number. Appearance is excellent, as is the...
Been collecting the parts and pieces to put this together for a while. No I wouldn't do this to a completed numbers matching EG. EG bare frame that...
I need to get pics taken, I'm charging the camera now. I don't see these at the shops I haunt like I did ten years ago, so I jumped on this. '89...
They have the 2/$20 surplus shoulder holsters in stock again so I ordered a pair. However, there is no way a Mak will fit in these, a PA-63 was...
I decided it might be nice to create a common side by side dimensional comparison of commonly available 9x18 caliber guns. I have most of it but I...
I am getting ready to buy some 9x18MM rounds and wanted to know the cheapest place to buy plinking/gun range ammo. I have my FFL03 and the cheapest I...
For me it was a purchase of convience in 1999 or 2000 cannot remember for sure. I wanted a smallish, easily carried pistol for an upcoming CCW permt...
OK I'm new to the forum so bear with me. I am already a Mak owner and love the ones I have. Nice and concealable and VERY accurate. I just...
I understand they came in in limited numbers and was wondering if any knows if they had specific year codes?
The episode "Green Beret - America's elite special force, versus a Spetznaz - Russia's top-secret, top-notch commandos. " They had the Makarov as one...
this arrived today. yes, it was me that paid $55.00 on gunbroker for a Chinese Makarov holster. I don't care if I overpaid. I got what I wanted. my...
Seems from the videos on YouTube, they train and use the PMM now. It appears, at least some of them, have a redesigned or heavier looking slide. I...
I am pleased to inform everyone, that the grips sent by Dennis, are extremely solid and good to go. I also tested the 8 round thumbrest with finger...
so . . . . HAPPY BIRTHDAY! :cheers: :clap: SlimTim
If you do I have your magazine. Will trade even up for any old 8 round magazine. I was looking through my stuff and thought I'd try to help a fellow...
Has anyone had any experience using a universal speed loader for their 9x18mm 10 rnd High Capacity Mag? Was thinking of getting one, perhaps the...
I have a Chinese Makarov ZZ series with a plain steel blued barrel, inside and out. It is not chrome lined. Is this a standard feature?
Yes, another thread on grip extentions. I bought a pack of 2 Pearce grip extentions ($12) made for the Beretta Tomcat (yeah, I know the Tomas Cat is...
last weekend I had the chance to load up and fire some of the original SWC cast bullets from the old Makarov.com Lee mould. Results were great...
I have two Bulgarian Makarov's. On one, the slide goes on like butter. On the other, it is a monster of a fight to get the slide on. I was...
My parkerized Aarsenal Makarov has completely different markings than my two blue Aarsenals. Left side of the slide has Makarov, cal.9x18, and made...
A pretty good price. And, I've never gotten any surprises with AIM: http://www.aimsurplus.com/product.aspx?item=f3p64
Went to the Oaks, Pa. gun show saturday and found a 62 E.G. in excellent condition with two mags and holster, five minutes after walking in. There...
Hello All is there any way to tell the year a PA-63 pistol was made by the serial number? mine is stamped AV177X on the frame, slide & mag. base...
Hello guys, The day finally came where I found a decently priced Mak @ cabelas believe it or not. I paid ~150 for it. Its a Bulgarian Makarov,...
I am definitly not sure what I would do in this situation. Two guys I know were headed up north last weekend and they stopped at a roadside park...
I have a IJ70-18AH Makarov. I have been looking all over the place to find Makarov 9x18mm high capacity 10 round magazines. Does anyone know where to...
I have a commercial blued, bulgy with the Miltex logo on the right side of the slide and an Aarsenal mark on the left side...it's not a Miltex Se for...
I got a box of Barnaul Mak HP ammo at the Dallas show last weekend. It is 95 gr. and the cases are steel. I've shot the various "Bears" ammo but...
I have a slide off of a IJ70-18A. Is there much of a market out there for anyone looking for just a slide? What is the price range these would be...
Has anyone heard of a Makarov air pistol? Have one that needs a clip, and don't know where to look. Can anyone help me? Would a regular gun shop be...
Sorry, this has probably been asked before. But I do remember hearing that under no circumstances should you shoot a .380 out of a 9mm and vise...
Greetings fellow members! Just joined yesterday. This December I plan on purchasing my first Russian Military Mak. This would be my fourth Mak...
For the very first time, I saw a video clip with an instructor using the 12 round Makarov pistol. Copy and past this, Шанс выжить (стрельба из ПМ)....
You're lucky, up in my parts revenooooors didn't use to make it this long. Happy Birthday!!!! ST...
:>
I think I must have a crappy mag, (Im hoping) the last time I shot the mak it jammed twice in one mag, (the slide cought the empty round) really...
Maybe "screwed" is too strong a word, I only lost eleven bucks. I'd been looking for some original EG grips and a member suggested I try Dealer...
Curious. Can't think of the year right now, buts its in decent shape with a little "etching" in the blue from peoples hands. Not really pits. Sadly,...
I have a Norinco 59 mak, and sense I've had it, the slide will only stay locked open after the last round is fired about every 4th or 5th mag. This...
have you ever seen MFS in a jhp?
Thinking about having a mak re-blued and would really appreciate you guy's input on who's good...thanks in advance.
I ran across this while looking over the ammo offerings from Hornady. Does anyone know if it's available and/or have tried it? It uses their great...
Okay, per my other thread asking about an East German Makarov trade, I went ahead and made the trade. I traded straight up for 1000rnds of Wolf 122gr...
Hello to all...I've been looking for some mag extension floor plates for one of my bulgy maks and can't find any...where can I find them?...thanks...
Wish me well whenever I go out and test them, please. I led Dennis to this site and we happen to share the name, Marshall. I had problems with the...
Hello. I bought 3 sets of Mr. Marschal's checkered Makarov stocks about 2 years ago. I don't shoot Makarovs as much as in the past but had read that...
I have posted on a local trader 1k rnds of 7.62x39 and a couple of 75rnd AK drum mags for sale or trade for a CZ-82 cause I want a CZ for CCW. I got...
I have a PA-63 and have a problem with the slide locking open after firing 1 or 2 rounds. I was looking at online parts and notice there is an...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules