WTS STAR Parts, Grips, Magazines........

[STAR]

For sale:

-Original Star factory grips for Star BM/BKM:




WALNUT $40
BLACK PLASTIC $35
PLASTIC SPANISH NAVY GRIPS $40 --VERY LIMITED SUPPLY.
WALNUT W/ STAR MEDALLION $45

-Also available for BKS, with or without STAR medallion, at $45:



-Original Star A/B/SUPER checkered walnut grips, the ones with diamonds on the screw holes at $55, also for STAR S, SS, S SUPER, SI.......... with or without STAR medallions:





-Original STAR pearlite grips, for PD, BM and CU models, with or without STAR medallions, at $60:




-Pearlite grips for STAR model A,B, SUPER series, several colors. Also for STAR S series, at $60:





-Pearlite grips for ASTRA 400, several colors, also checkered walnut, at $60:




-ASTRA 600 grips, just the pair on the picture available, at $55:



-Original, brand new STAR cleaning kits for 9mm, in soft case, STAR marked, at $20 each. You can use it or just add it to your STAR collection!!!




-STAR original magazines, new, unused for models BM, FIRESTAR 43, FIRESTAR 243, FIRESTAR 45, ULTRASTAR 205, MEGASTAR, 30M, S, FR:




All models at $45 per unit. Other models please ask.

-ASTRA original magazines, new, unused, for models A60 A70 A80 A90 A100 CONSTABLE 300 3000(Condor) 4000(Falcon), 400, 600, 800.

All models at $45 per unit.

-Original new, unused parts for STAR models BM, 30M, FIRESTAR, ULTRASTAR and PD. Also for ASTRA FALCON, please ask.


-JUST ASK FOR THE PART YOU NEED FOR YOUR STAR OR ASTRA, PROBABLY I CAN HELP-

-NO BARRELS SLIDES OR FRAMES. DON'T ASK FOR THESE, I DON'T HAVE ANY-


-Springs and plungers for BM thumb safety. $10
-Brand new firing pin sets for BM, (the inertial ones) $30
-Brand new extractor sets for BM. $30

-BRAND NEW FIRING PINS FOR STAR B at $30 including spring.

-ORIGINAL BRAND NEW ASTRA 400 (1921) magazines at $45 each.

-ORIGINAL BRAND NEW STAR FIRESTAR M43 MAGAZINES WITH +1 EXTENSION

-ORIGINAL BRAND NEW STAR FR SPORT-TARGET COUNTERWEIGHTS

-ORIGINAL BRAND NEW FINGER EXTENSIONS FOR STAR PD MAGAZINES



This is just a hobby, I'm not a dealer, so please be patient.
Please contact by EMAIL. (Click on my name and you will have an option to do so)

[reb henderson]

I sent you a pm but I am looking for some buffer pads for a Star PD. Can you help?

[STAR]

I sent you a pm but I am looking for some buffer pads for a Star PD. Can you help?

Sorry, I don't have any left at this moment.

Thank you!!!

[STAR]

Back again from vacation, please anyone who sent any PM or email and didn't got any reply, resend it and will be able to help.

Thank you!!!

[stockade]

Saw your add for Star parts, I want to purchase a pair of factory walnut grips for My BKM, how do I go about it? I am new to yhis site.

Thanks

Stockade

[STAR]

Saw your add for Star parts, I want to purchase a pair of factory walnut grips for My BKM, how do I go about it? I am new to yhis site.

Thanks

Stockade

PM sent with details.

Thank you!!!

[Plaidad]

Star -
I would like to buy some black plastic grips for a Model BM
Plaidad

[poilu2]

star, i'm looking for a firing pin and extractor for my firestar m-40. thanks. joe

[STAR]

Star -
I would like to buy some black plastic grips for a Model BM
Plaidad

Email sent on the subject.

star, i'm looking for a firing pin and extractor for my firestar m-40. thanks. joe

Joe, I just sent you a PM.

Thank you!!!

[my dog chomp]

do you have a barrel link & pin for a star mod b 9mm thanks for your time

[Plaidad]

Star -
I don't understand why, but I have not received your email. I would still like to purchase a set of black plastic grips for a Model BM
Thank you,
George

[STAR]

do you have a barrel link & pin for a star mod b 9mm thanks for your time

Hello, yes, I have them. Please contact by PM or email for details. Thank you!!!

Star -
I don't understand why, but I have not received your email. I would still like to purchase a set of black plastic grips for a Model BM
Thank you,
George

Just sent a PM.

[STAR]

New items added!!!

[kissalive74]

Do you have any Ultrastar .40 8 round mags?

[STAR]

Do you have any Ultrastar .40 8 round mags?

Have plenty of them. Please contact by PM or email.

Thank you!!!

[benwizard]

I need a firing pin for an Astra A-70 (9mm). If I don't I'll have to take my wife to the gun store and she will (instinctively) go directly to the most expensive gun in the place. Please save my credit balance by helping me find this damn firing pin!

Steve,
Gun poor in Indiana

[STAR]

I need a firing pin for an Astra A-70 (9mm). If I don't I'll have to take my wife to the gun store and she will (instinctively) go directly to the most expensive gun in the place. Please save my credit balance by helping me find this damn firing pin!

Steve,
Gun poor in Indiana

Steve, I can help you, don't worry........ look for your PM.

[marionkid]

Hi Star, Local pawn shop has Star BM with bent slide stop/link pin assy, I'd like to get it. Would you have that part? thanks,Philip

[deer*doctor]

I would like to know if you have a magazine with the extension for a model M43 9mm and a Model M45 .45? and If so how can i get in contact with you by email?

[STAR]

Hi Star, Local pawn shop has Star BM with bent slide stop/link pin assy, I'd like to get it. Would you have that part? thanks,Philip

Hello Philip, no trouble, I have plenty of them, original, factory new. Please contact by PM or email for details. Thank you!!!

I would like to know if you have a magazine with the extension for a model M43 9mm and a Model M45 .45? and If so how can i get in contact with you by email?

YES, I have both of them, I just replied to your email. Thank you!!!

[idsubgun]

I highly recommend Jorge. It was a pleasure doing business with him. Very fast response, very much the gentleman.

Thank again Jorge.

Bill

[flightsimmer]

Hi Star;

Any chance you have a recoil spring guide assembly complete or parts for a Star PD. I have new buffers for them but I have a guide rod that I cannot get the end to unscrew for some reason and I'm afraid that by the time I get it off if ever it might be damaged beyond repair.

Thanks, Dan.

[STAR]

Hi Star;

Any chance you have a recoil spring guide assembly complete or parts for a Star PD. I have new buffers for them but I have a guide rod that I cannot get the end to unscrew for some reason and I'm afraid that by the time I get it off if ever it might be damaged beyond repair.

Thanks, Dan.

Hello Dan,

Yes, I don't have the buffers (I sold all the complete recoil assemblies with buffers), but have some guides without them, ready to put a new one.

Please contact by PM or email, thank you!!!

[nitzer]

I have a Star 10mm Megastar that needs a firing pin. You wouldn't happen to have one of those would you?

Thanks....

PM sent.

[combatshooter]

PM sent

[luke58]

I am looking for a guide rod and extractor for a M40. Do you have the original rubber grips?

Drew

[STAR]

I am looking for a guide rod and extractor for a M40. Do you have the original rubber grips?

Drew

Hello Drew, yes, I have all the parts and grips you need for the M40. Please contact by PM or email, I will be glad to help.

Thank you!!!

[secretsquirrel]

pm sent

[secretsquirrel]

I am looking for a firing pin and spring and a set of grip screws for a model B if you have them.
Thanks,
Larry

[bluesky18]

Hello Star I would like to buy a guide rod I don't need the spring or buffer. You can e-mail instruction's to me to make payment if you have any. Thank's John Va. e-mail bluesky18@cox.net

[Cbrant_2000]

I'm looking for a guide rod and the magazine catch assembly, the previous owner kind of buggered them up.


thanks.

[MisterTFM]

I need a new extractor, part number 343302020.

Also, do you have any magazines that will fit this gun?

PM sent.

Thanks.

MisterTFM
Butler, PA, USA

[STAR]

I am looking for a firing pin and spring and a set of grip screws for a model B if you have them.
Thanks,
Larry

Hello Star I would like to buy a guide rod I don't need the spring or buffer. You can e-mail instruction's to me to make payment if you have any. Thank's John Va. e-mail bluesky18@cox.net

I'm looking for a guide rod and the magazine catch assembly, the previous owner kind of buggered them up.


thanks.

I need a new extractor, part number 343302020.

Also, do you have any magazines that will fit this gun?

PM sent.

Thanks.

MisterTFM
Butler, PA, USA

Replies sent to all of you. I have all the parts you're asking for.

Thank you!!!

[cunomor]

Hi,
I sent you a PM, looking for A70 (9mm) parts (barrel, grips, firing pin, whatever you might have).
Thanks,
-derek

[STAR]

Hi,
I sent you a PM, looking for A70 (9mm) parts (barrel, grips, firing pin, whatever you might have).
Thanks,
-derek

As already said on my post:

-NO BARRELS, SLIDES OR FRAMES-

[STAR]

Randall Fettes here. Just bought myself a used Star BM and saw you had some factory grips, although the post is a little old. let me know if you still have some. thanks I also would like to buy a mag. The grips that I want are the black plastic.

All items on the post are available. Email sent.

[Marzon]

I am looking for an extractor and an extractor spring for a 9mm Firestar. I have sent you a PM, please let me know if you have these parts. Thanks.

[ibcaptain]

I'm looking for the Magazine catch, catch latch and catch latch spring for a Star Model B, do you have them and if so, how much. Also looking for Magazines for a Star Model 30M.

Thanks, Dan

[LoTech]

Star: I am interested in the Astra 600 wood grips. The left grip in the photo seems to have a slight split above the top bolt hole. Please clarify if this is is a crack or just a reflection. Also, can you confirm that the inside faces of the grips are correct, since it seems to affect the operatoin of the trigger bar? If the grips are still available, please send instructions for completing the order.

Thanks,
Carlos

[coneten]

STAR, I am looking for a mag or two for a STAR .22 semi auto pistol with a longish barrel. It has F SPORT 359955 stamped on butt frame.

[STAR]

Star: I am interested in the Astra 600 wood grips. The left grip in the photo seems to have a slight split above the top bolt hole. Please clarify if this is is a crack or just a reflection. Also, can you confirm that the inside faces of the grips are correct, since it seems to affect the operatoin of the trigger bar? If the grips are still available, please send instructions for completing the order.

Thanks,
Carlos

The grips are available, PM sent on the subject.

[willie]

Looking for factory 7 rd mags for M-43. How adout pearl grips?

[turkeestalker]

Jorge,
I sent you a pm yesterday, before I found your posting here. Looking for an M40 extractor or two if you have any available.
Thanks,
Jim

afterthought.....
Come to think of it, what about a front sight blade for an M45 as well?
Thank you again,
Jim

[NovCadetShotz]

Interested in acquiring two (2) magazines for a Star Mod 30M. Do you have any available?

[Cocoboy31]

Hello,

I'm interested in 2 mags for an ASTRA 400 9mm Largo "navy model" (with the mag's latch on the right side like for the astra 600).

I sent you a PM.

Thanks.