Grip kit
Results 1 to 34 of 34

Thread: Grip kit

  1. #1

    Default Grip kit

    Does anyone have any experience with this grip kit? How does it compare to the one by Fab-Defense? Thanks in advance!

    http://www.pmgrip.com




    Sent from my iPhone using Tapatalk

  2. #2
    Join Date
    Dec 1969
    Posts
    1,985

    Default

    Have no experience with this one, but in my opinion, but it doesn't look built with as much quality as the FAB.

  3. #3
    Join Date
    Nov 2016
    Posts
    18

    Default

    Not sure the reasons for the massive palm swell. Does not look comfortable at all, and wider than normal Mak grips. Also adds another thing to go wrong with the lever. Proper training makes heel release a non issue.

    Pass.

  4. Remove Advertisements
    GunBoards.com
    Advertisements
     

  5. #4
    Join Date
    Jan 2009
    Location
    Tx
    Posts
    878

    Default

    If it's made in Russia I want it! Appears to be lots simpler to install and practical to me.

  6. #5
    Join Date
    Jan 2009
    Location
    Tx
    Posts
    878

    Default

    Could be a problem with accidental release though.

  7. #6
    Join Date
    Jan 2009
    Location
    Tx
    Posts
    878

    Default

    This is available for 12 round hi capacity now and 2017 will bring in the PMM kit. This should really help out the aging eyes.
    Attached Thumbnails Attached Thumbnails 16047586_1481478771060.jpg   16047847_1481478792971.jpg   16047843_1481478806695.jpg  
    Last edited by septembermars; 12-11-2016 at 02:19 PM.

  8. #7
    Join Date
    Jan 2009
    Location
    Tx
    Posts
    878

    Default

    They have laser grips for PMM! I like this company.

  9. #8
    Join Date
    Jan 2009
    Location
    Tx
    Posts
    878

    Default

    On Sun, Dec 11, 2016 at 12:24, Aleksandr Korotkov
    <[email protected]> wrote:

    This grip for a Makarov pistol with 8 rounds magazine.
    Grip for the Makarov pistol with 12 rounds magazine is under construction, estimated time of release in March-April 2017.
    There is grip with a laser sight for a Makarov pistol PM with 10-12 round magazine.
    The grip made of black plastic PLA, with using 3D printing. See attached image. Price $ 90.

  10. #9
    Join Date
    Jul 2009
    Location
    Eastpointe (formerly East Detroit), Michigan
    Posts
    727

    Default

    I highly recommend this grip. Mine took a month to get here from Moscow, but it is worth the wait. The FAB grip is nice, but I prefer these Russian grips to the Israeli offering. This grip is compatible with the EFA-2K holster, the FAB is not.

    They were running a deal a few months ago for the grip kit + EFA-2K holster for 100$...I think the price has gone up since then.

    Click image for larger version. 

Name:	IMG_20161213_171929[1].jpg 
Views:	59 
Size:	135.0 KB 
ID:	1793138

  11. #10
    Join Date
    Nov 2016
    Posts
    18

    Default

    Quote Originally Posted by mudoven View Post
    I highly recommend this grip. Mine took a month to get here from Moscow, but it is worth the wait. The FAB grip is nice, but I prefer these Russian grips to the Israeli offering. This grip is compatible with the EFA-2K holster, the FAB is not.

    They were running a deal a few months ago for the grip kit + EFA-2K holster for 100$...I think the price has gone up since then.

    Click image for larger version. 

Name:	IMG_20161213_171929[1].jpg 
Views:	59 
Size:	135.0 KB 
ID:	1793138
    The mag looks possibly easy to drop accidentally with that prominent release.

  12. #11
    Join Date
    Apr 2011
    Location
    South of DC
    Posts
    10,341

    Default

    If they don't have a left handed version, I'm passing on it. If they do, well....
    Looking for USS Casimir Pulaski SSBN 633 items.

    This was the most interesting conversation I was ever not a part of and I look forward to the next conversation on the topic.
    - Pcan

  13. #12
    Join Date
    Jan 2009
    Location
    Tx
    Posts
    878

    Default

    In the demo vids you see him keep the thumb up.

  14. #13

    Default

    I like the design and ingenuity, but it's rather fugly especially on a pistol with sleek lines and old school aesthetics.

  15. #14
    Join Date
    Jan 2013
    Posts
    133

    Default

    Where's the link for the lasergrip? I didn't see the laser grip on the link provided by the OP. When it comes out for the PM I'm getting it.
    ​Get 55!

  16. #15
    Join Date
    Jan 2009
    Location
    Tx
    Posts
    878

  17. #16

    Default

    Laser grip? That's like running and EOTech on an M1 Garand lol....

  18. #17
    Join Date
    Jul 2009
    Location
    Eastpointe (formerly East Detroit), Michigan
    Posts
    727

    Default

    ^ A laser on a Mak, why not? The Ruskies do it...check out this vid, @ the 2:00 mark...laser seems pretty effective.
    https://www.youtube.com/watch?v=mdCx7Ve3ozg

  19. #18

    Default

    Quote Originally Posted by mudoven View Post
    ^ A laser on a Mak, why not? The Ruskies do it...check out this vid, @ the 2:00 mark...laser seems pretty effective.
    https://www.youtube.com/watch?v=mdCx7Ve3ozg

    Ruskies do a lot of things......doesn't mean I will go out and emulate them.

  20. #19
    Join Date
    Jan 2015
    Location
    Oregon
    Posts
    623

    Default

    Grip laser for my aging eyes at night! Worth a looky.

  21. #20
    Join Date
    Jan 2013
    Posts
    133

    Default

    I just now emailed them. This would really be nice to have.

    Edit/Update: I just now placed the order through PayPal, for the lasergrip with the mag release. The cost was $110.00 and I'll provide pics when I receive it. I've never ordered anything out of Russia before, so this is a new experience. Alexander was very helpful.

    Update: Just now received the grips. It takes around a month.
    Last edited by Nikolai; 01-19-2017 at 10:45 AM. Reason: Update
    ​Get 55!

  22. #21
    Join Date
    Jan 2009
    Location
    Tx
    Posts
    878

    Default

    Quote Originally Posted by BlackList View Post
    I like the design and ingenuity, but it's rather fugly especially on a pistol with sleek lines and old school aesthetics.
    Initially I disliked the newly designed grips for the PM, only because of the appearance, now I think it is definitely the one to use. Some dislike the ergonomics of the standard grip. It was one of the first things I noticed when I held the PM and also the simplicity of parts. I thought the pistol should have felt like a Walther PP or 1911.

    I am sticking with the fugly new PMM grip, I like it.

  23. #22
    Join Date
    Jan 2009
    Location
    Tx
    Posts
    878

    Default

    You could have asked through the direct email and it may have been less expensive. The laser through them was 90.00 less than ebay.

  24. #23

    Default

    Quote Originally Posted by septembermars View Post
    On Sun, Dec 11, 2016 at 12:24, Aleksandr Korotkov
    <[email protected]> wrote:

    This grip for a Makarov pistol with 8 rounds magazine.
    Grip for the Makarov pistol with 12 rounds magazine is under construction, estimated time of release in March-April 2017.
    There is grip with a laser sight for a Makarov pistol PM with 10-12 round magazine.
    The grip made of black plastic PLA, with using 3D printing. See attached image. Price $ 90.
    I just sent them an email requesting information on the high cap laser grip. Thank you for sharing that!!! That would be amazing!!!



    Sent from my iPhone using Tapatalk

  25. #24
    Join Date
    Dec 1969
    Location
    Dixie
    Posts
    6,108

    Default

    makarov.com sold a domestic design to make a grip magazine release that this appears to be a copy of, it was modified into a Pearce grip. Mine proved worthless. Hopefully this is improved.

    SlimTim
    Budweiser's Real Man of Genius: Mr. Gun Show Junkie

    Georgians! Tennesseans! Join your neighbors in the TN/GA Shooters forum.



  26. #25

    Default

    Quote Originally Posted by Nikolai View Post
    I just now emailed them. This would really be nice to have.

    Edit/Update: I just now placed the order through PayPal, for the lasergrip with the mag release. The cost was $110.00 and I'll provide pics when I receive it. I've never ordered anything out of Russia before, so this is a new experience. Alexander was very helpful.
    Can't wait for the pics! Also can't wait for the hi cap laser/mag release combo to come out next year!


    Sent from my iPhone using Tapatalk

  27. #26
    Join Date
    Jan 2017
    Posts
    12

    Default

    Hi, my name is Aleksandr.
    I sell grip on site www.pmgrip.com and Ebay.
    If you have any questions about these grips ask, I will try to quickly answer them.

  28. #27
    Join Date
    Apr 2011
    Location
    South of DC
    Posts
    10,341

    Default

    Quote Originally Posted by Shlepok View Post
    Hi, my name is Aleksandr.
    I sell grip on site www.pmgrip.com and Ebay.
    If you have any questions about these grips ask, I will try to quickly answer them.
    Ok, do you have a left handed version????
    Looking for USS Casimir Pulaski SSBN 633 items.

    This was the most interesting conversation I was ever not a part of and I look forward to the next conversation on the topic.
    - Pcan

  29. #28
    Join Date
    Sep 2011
    Location
    N.C.
    Posts
    912

    Default

    Hi Aledxandr, welcome to the forum! ABTOMAT

  30. #29
    Join Date
    Jan 2017
    Posts
    12

    Default

    Quote Originally Posted by VA-Vet View Post
    Ok, do you have a left handed version????
    Unfortunately, there is no version for left-handers.

  31. #30
    Join Date
    Jan 2017
    Posts
    12

    Default

    Quote Originally Posted by ABTOMAT View Post
    Hi Aledxandr, welcome to the forum! ABTOMAT
    Thank you!

  32. #31
    Join Date
    Apr 2013
    Location
    N. Louisiana
    Posts
    258

    Default

    Quote Originally Posted by Shlepok View Post
    Unfortunately, there is no version for left-handers.
    As it should be. A heal clip is ambidextrous. In the US we are in love with speedy mag changes. In Europe they try to hang on to the one they got. I've often found that the Kahr P9 I was carrying had the magazine released almost 1/4". Got tired of carrying an expensive single shot.

  33. #32

    Default

    Quote Originally Posted by Shlepok View Post
    Hi, my name is Aleksandr.
    I sell grip on site www.pmgrip.com and Ebay.
    If you have any questions about these grips ask, I will try to quickly answer them.
    Any chance of offering a group buy for gunboard forum members?

  34. #33
    Join Date
    Jan 2017
    Posts
    12

    Default

    Quote Originally Posted by StlMakGuy24 View Post
    Any chance of offering a group buy for gunboard forum members?
    I think it's possible. For groups forum members from 5 people or more, I can make a discount of 7%. Price in this case will be $ 46.50 + free shipping to USA. Payment via paypal.
    I do not know how to organize group offers on forum. Any idea how to do it?

  35. #34

    Default

    Quote Originally Posted by Shlepok View Post
    Hi, my name is Aleksandr.
    I sell grip on site www.pmgrip.com and Ebay.
    If you have any questions about these grips ask, I will try to quickly answer them.
    Any timeline for the hi-cap laser and mag release combo grip? I can't wait for this to be a thing!!!


    Sent from my iPhone using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •