Aimpoint Clone, repeat CLONE, red dot sight w/ two mounts.
Lightly Used condition (mounted but not fired). Came off my personal rifle.
Comes with two mounts and flip up lens covers.
- Comes with throw-lever QD mount with removable riser (riser installed in pictures). Riser allows to co-witness with AR sights.
- Also comes with Cantilever type mount.
- Flip-up lens cover has the Aimpoint logo
- Recessed into the side of the sight is the Aimpoint logo and also "CompM2 4MOA 10338#240944".
- Red dot looks to be about 4 or 5 MOA.
- Windage, elevation and brightness adjustments
- Operates on two LR44 button cell batteries (included)
- O-ring seals on battery compartment and adjustment caps
I have not shot with this sight, but it is very solid and stays zero'd with my front sight every time I pick it up.
$90, shipped. Money order or paypal (Add $3.00 for paypal) SPF -ACKF
Contact me at [email protected]. Please email instead of using PM. This will be listed on multiple boards.
Suomi M31 parts kit w/ intact front filler.
- Kit has intact front filler. Rear filler was torched, BUT ... INCLUDES NEW REAR FILLER
- Also includes precut lower siderails
- Short shroud (no compensator)
Kit includes small parts shown in pictures. Please let me know if you need any specific pictures.
Price is $150 + shipping. SPF BRADROCK Money order or Descrete paypal (add 3%)
Contact me at [email protected]. Please send me an email instead of a PM. This will be listed on several boards.
Last edited by gearshanty; 07-07-2009 at 02:37 AM.
The kit I originally listed was sold, but I was holding one back and gathering parts to build it. Unfortunately, I need to sell it now.
The kit is in similar condition as the one in the pictures.
I am also responding to the couple of emails sent.
Here's what I've got:
Suomi M31 Builders Package
Suomi M31 9mm SMG parts Kit in good condition with Lots of Extras - This kit is missing the original full-auto bolt - Includes Usable Front Filler (uncommon and hard/expensive to find replacements)
Extras: - Includes New Rear Filler (original was damaged by the torch cut) - Includes 16.25” Barrel (original Barrel professionally turned down and extension TIG welded in place) - Includes Prexis 80% Receiver w/ bonded-on template (Reduced I.D. for ATF compliance) - Includes Prexis Semi-only Bolt (closed bolt) with hammer/striker cut and AR-15 firing pin installed (fits reduced I.D. receiver) - Includes one 71rd Drum mag - Includes one 36rd Stick mag
If the builders kit does not sell and you decide to part it out i would be interested in the 80% receiver , side pieces, semi bolt and fillers =) LOL pretty much all the semi parts minus the parts kit =)