M39 9.5mm tall front and rear peeps sights - Page 2

DonW · #46 09-09-2009, 04:11 PM

I assume there is no permanent alteration to the rifle? If so Put me down for a set.

For those that may want a smaller (or larger) aperture, it looks like there is enough room to drill out the existing aperture and tap the hole so a Merit adj aperture disc can be easily installed - then pick your own hole (well, so to speak,) Brownells sells them:
http://www.brownells.com/.aspx/cid=0...l/search=merit

Don

mg42 · #47 09-29-2009, 10:35 PM

Things are still on schedule for mid October. I will have a better idea of a delivery date next week or on Friday. Thanks to all who have emailed me. I will respond to the emails when the dates are solid and promise to get the parts out as quick as I can get them blued and oiled up.

The front blade will be .050" wide. Thanks for the feedback, this was a good suggestion.

Happy Shooting,
Jason

Gosh I have not been to the range in a month! High Power match next weekend : )

aeroc123 · #48 09-29-2009, 11:37 PM

I would also be interested in a set if possible. Thanks. email sent

Rock · #49 09-29-2009, 11:52 PM

email sent...

rats25 · #50 09-30-2009, 12:08 AM

I'd like a couple of sets too if it is not too late.

Seano · #51 09-30-2009, 12:11 AM

Very interested in one set for my M39. Email sent.

coford · #52 09-30-2009, 08:56 AM

I would like a set. Looks great.

coford@gmail.com

jonnyo55 · #53 09-30-2009, 12:09 PM

I'll take a set....let me know when avail.

atob37 · #54 10-08-2009, 06:43 PM

Any updates?

ak_milsurp · #55 10-08-2009, 07:12 PM

Good deal for sure and certainly demand for same!.. prices for just a rear peep would be wise...

I would take at least 3 sets of front and rear plus some of the rear peep only....

I have have four "Peep blades" already. Two look like yours the other two are similar idea but more like sheet steel bent and cut to fit with a peep drilled.....

If anyone is interested I could take pics of the differences

6mmintl · #56 10-08-2009, 08:16 PM

Put me down for 1 set, make that two sets

mg42 · #57 10-08-2009, 10:50 PM

Thanks for all of the emails everyone.

Well, the sights are a few days late in arrival but I'm working with a machinist that is out of town on these so they may be held up in the mail. They were supposed to of shipped on Fri or Mon; so hopfully they will be here by Sat. so I can start to blue them while I have some time off of work after my High Power match.

Anyways once they are all ready to go I will start going through my emails and resoponding to them in the order that they were received. I'm looking forward to putting them on and putting some rounds down range with my new B barrel.

They should be ready to ship next week. Thanks for being patient. Work has really picked up at my job so I know things for alot of other manufacturers are on the up de up and that is good for the economy.

Happy Shooting,
Jason

HA! They came in today, mail person hid them behind something. They were oil soaked instead of oil free so I have to wash them in acetone a few times to clean them. I'll give an update when they are ready!
SWEET!

JMCJR · #58 10-08-2009, 11:49 PM

I'm in for one set, Thanks John

LarryM · #59 10-09-2009, 12:18 AM

I'd definitely like to order one set.
Thanks

milprileb · #60 10-09-2009, 08:57 AM

I want a set with the old and with the new front sight blade. Old eyes are hurting my shooting so your set is a god send.

Let me know where t o send money order.

I am definitely in dire need of this sight solution for my shooting

GTM1 · #61 10-09-2009, 09:11 AM

I wonder if your front site would fit my M-27...Hmmmmm... Off to the safe I go. :-)

ACarpenter · #62 10-09-2009, 09:40 AM

Looks really neat! I'm interested in a set.
Is there any alteration or drilling required to the rifle itself?

MuscleGarunt · #63 10-09-2009, 02:54 PM

Anxiously awaiting your E-mail.

BCR#1 · #64 10-13-2009, 08:57 PM

Tag.

mg42 · #65 10-14-2009, 01:18 AM

The sights for the M39 are ready to go! I installed a set yesterday and they have a great sight picture. The narrow front blade looks really sharp and should enable for more precise shooting especially when combined with the rear peep sight.

I responded to all of the emails in my inbox at my yahoo email address. One or two bounced back. There are several sets of sights that are still up for grabs if you have not emailed me.

iamrolln at yahoo dot com

Thanks to all and happy shooting, J

Seano · #66 10-14-2009, 01:24 AM

I emailed you at the same time I wrote that I would take a set in this thread. Never heard back from you.

I would really like a set of these sights.

Please email me at:

desperado418@gmail.com

thanks,
Sean

craig61a · #67 10-14-2009, 11:51 PM

Sent email - I never got a reply either. not sure if the original email went through, didn't appear that it bounced. I sent a followup email just now. Would like a set.

Thanks

Apparently that address is not valid:

failure noticeWednesday, October 14, 2009 9:47 PMFrom: This sender is DomainKeys verified"MAILER-DAEMON@yahoo.com" <MAILER-DAEMON@yahoo.com>Add sender to ContactsTo: craig61a@yahoo.comHi. This is the qmail-send program at yahoo.com.
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up. Sorry it didn't work out.

<imrolln@yahoo.com>:
66.196.82.7 failed after I sent the message.
Remote host said: 554 delivery error: dd This user doesn't have a yahoo.com account (imrolln@yahoo.com) [0] - mta162.mail.re1.yahoo.com

Emailed yesterday through GunBoards also - Did you get it?

10/16/2009 - Still waiting to hear from you...

10/19/09 = got your email, responed back - Thanks

keithreid · #68 10-15-2009, 09:13 AM

I spoke up for 5 sets on 8/28 and haven't heard anything by email? my email is keithareid@msn.com

y'all have a good day, Keith

Seano · #69 10-15-2009, 10:24 PM

Sent another email just now. Still waiting on the "yes" or "no" on sending you the $27 for one of these sight sets.

Please email me directly at:

desperado418@gmail.com

The forum PM and email systems seem to not be getting our messages to each other.

NAT56 · #70 10-16-2009, 11:05 AM

I Would like a set, keep me posted.

tiekka · #71 10-16-2009, 05:41 PM

You guessed it.. email sent

mg42 · #72 10-22-2009, 10:21 PM

I'm sorry for the confusion with some bouncing messages ect.. I have responded to all of the emails in my inbox and sent a few others via the boards tonight. If you still have not gotten a message and are interested in the sights you can email me at iamrolln@yahoo.com

I started shipping this week so many of you should have your packages soon

Thanks,
Jason

rcbif · #73 10-26-2009, 09:50 PM

I got a question. My m39 shoots about 6in high at 100yrds. Would this sight system fix that? Is the front post taller than the original? I may be interested in a set. It looks like a nice product, but I may wait for a few reviews.

atob37 · #74 10-26-2009, 09:58 PM

I received my sights today, they were a breeze to install. Hopefully will be able to get to the range next week. Thanks!

coford · #75 10-26-2009, 11:12 PM

I got my sights Friday and they are fantastic! I put them on in about 1 minute and they have a great sight picture. The sights are of exceptional quality and are a great value. Thank you for your effort to make this project a success!

coford

mg42 · #76 10-27-2009, 01:31 AM

Thanks for the feed back! I hope everyone enjoys them and all of you have been a pleasure to deal with. Gezzz, I need to find the time to hit the range myself now that it's not so hot.

If anyone has an idea for something that they would like made, shoot me a line to discuss. These projects are fun and I like to work with folks and design things to make life eaiser or more enjoyable.

Bob G, your email bounced twice maybe you have a tight firewall set up or something. I'll try to send you info again tomorrow.

Jason

BCR#1 · #77 10-27-2009, 06:20 PM

Are you going to have more sets made or not?????????????? I e-mailed you this question and got no response.

Thanks,
Bill

riflemanone · #78 10-27-2009, 07:36 PM

Will these sights fit a Tikka 91/30 as well as a MN 91/59?
My old eyes can use all the help they can get.
tnx
riflemanone

mg42 · #79 10-28-2009, 01:51 AM

Bill (BCR) please check the email against the post above. I sent replies to everyone today and try to check and reply daily but work gets me swamped on occasion. Yes I am planning to have a few more sets made for the folks who did not get some this time around.

Rifleamone, I'm sorry but these sights are specific to the M39.

milprileb · #80 10-28-2009, 07:01 AM

Perfect fit, easy to install and I have posted my results on the Collectors Forum

My results: beyond my expectations. Bloody Wonderful results.

Exactly what I needed to get accuracy with my old eyes that struggle with the notch
rear sight but do (for now) well with peep sights.

These sights do not harm the weapon and do not require gunsmithing to put on. Mojo sights require taking rear sight leaf off and replacing it.

THis is a 2 minute replacement drill that is not permanent and it is a great value in my opinion.

And since I value my opinion, I think a lot of these sights.

BCR#1 · #81 10-28-2009, 05:33 PM

Quote:

Originally Posted by mg42

Bill (BCR) please check the email against the post above. I sent replies to everyone today and try to check and reply daily but work gets me swamped on occasion. Yes I am planning to have a few more sets made for the folks who did not get some this time around.

Rifleamone, I'm sorry but these sights are specific to the M39.

Thanks Jason. Should I go ahead and send payment or wait as I already have your address.

Thanks,
Bill