Gunboard's Forums

Go Back   Gunboard's Forums > Gunboards Trader-Classified Ads-Sponsors Boards > Group Buy Forum

Group Buy Forum A group buy forum that will allow members special pricing on items from various vendors. The only postings allowed here are those that are group buys WE set up. Members or outside vendors are not allowed to start their own buys and use the board for this purpose.

Reply
 
Thread Tools Display Modes
  #1  
Old 10-07-2009, 10:37 PM
Vic's Avatar
Vic Vic is offline
Administrator
 
Join Date: Sep 2007
Location: Michigan, USA
Posts: 7,423
Default Polish 7.62x25 Group Buy from Military Shooters LLC!

Military Shooters is now offering the GunBoards membership the chance to sign on for a group buy of our Polish 7.62x25mm ammunition. This is the 50’s dated 86gr FMJ ammunition we have been discussing. It is packed in sealed tins of 1260 rounds each. The DELIVERED price will be $135.00 per single can. If you want (2) or more the price will be $132.50 each. If you are interested in participating please follow these instructions.

Go to our web site www.militaryshooters.com. Under FEATURED ITEMS select 7.62x25 and choose the quantity that you desire. Proceed to check out and run thru the normal order sequence. At the bottom of select payment option section there is a “Coupon Code” box. If you want just a single tin of the 7.62x25 enter GB76225 into the coupon code box. If you desire (2) or more tins enter GB76225-2.

Our order system will than recalculate your order to reflect the correct delivered price. Please do not enter any other products on this order besides the 7.62x25 ammunition.

We are looking to move 100 cans of this ammo, we will not process any orders till that level has been reached. We will post updates on progress to this listing so you know how close we are getting.

Thanks - MP5

Pol-1.jpgPol-4.jpgPol-3.jpg
__________________
Owner/Administrator of Gunboards.com
Mosin Nagant.net
Michigan Historical Collectables

"Tulta munille!"

"Terror is not a new weapon. Throughout history it has been used by those who could not prevail, either by persuasion or example. But inevitably they fail, either because men are not afraid to die for a life worth living, or because the terrorists themselves came to realize that free men cannot be frightened by threats, and that aggression would meet its own response. And it is in the light of that history that every nation today should know, be he friend or foe, that the United States has both the will and the weapons to join free men in standing up to their responsibilities."
John F. Kennedy
Reply With Quote
  #2  
Old 10-08-2009, 01:25 AM
pentium's Avatar
pentium pentium is offline
Senior Member
 
Join Date: Dec 1969
Posts: 326
Talking I ordered two.

I just ordered two cans.
__________________
Feed me blood, for I am thirsty!
Reply With Quote
  #3  
Old 10-08-2009, 10:53 PM
dominicfortune00 dominicfortune00 is offline
Senior Member
 
Join Date: Jan 2008
Posts: 154
Default

I ordered 2 cans just now.

Need to send in the ammo statement tomorrow.
__________________
I aim to misbehave.

Mostly harmless.
Reply With Quote
  #4  
Old 10-09-2009, 08:50 AM
NY50/70 NY50/70 is offline
Senior Member
 
Join Date: Apr 2009
Posts: 246
Default

I ordered one.
Reply With Quote
  #5  
Old 10-09-2009, 12:49 PM
Buggs Buggs is offline
Junior Member
 
Join Date: Oct 2009
Posts: 1
Default Another Deal

I just bought a sealed tin from Sportsman's Guide. it was $119 and when I joined their club I got free shipping, a $5 off coupon and 20% off. Ammo looks good, going to pick up my TT33 today.
Reply With Quote
  #6  
Old 10-10-2009, 12:08 AM
MP5 MP5 is offline
Member
 
Join Date: Jun 2009
Posts: 68
Default Were at 20 cans - MP5

Apples and oranges. Sportsman guide sells Romanian cans of a lesser quainity. - MP5

Quote:
Originally Posted by Buggs View Post
I just bought a sealed tin from Sportsman's Guide. it was $119 and when I joined their club I got free shipping, a $5 off coupon and 20% off. Ammo looks good, going to pick up my TT33 today.
Reply With Quote
  #7  
Old 10-11-2009, 09:33 PM
creeks creeks is offline
Senior Member
 
Join Date: Dec 1969
Posts: 233
Default

Quote:
Originally Posted by MP5 View Post
Apples and oranges. Sportsman guide sells Romanian cans of a lesser quainity. - MP5
The Romanian is 1980's manufacture and good stuff also.
Reply With Quote
  #8  
Old 10-11-2009, 11:50 PM
TDRacing13 TDRacing13 is offline
Member
 
Join Date: Mar 2009
Posts: 62
Default

I ordered mine a few days ago. I can wait to take delivery and try it out! Thanks for giving us this great offer and supporting Gunboards!!
Reply With Quote
  #9  
Old 10-12-2009, 09:08 AM
MP5 MP5 is offline
Member
 
Join Date: Jun 2009
Posts: 68
Default Were at 28 cans - MP5

Thanks TDRacing13 - This is building a little slower than I had thought it would after all the initial response that we saw. But were getting there. - MP5

QUOTE=TDRacing13;1058837]I ordered mine a few days ago. I can wait to take delivery and try it out! Thanks for giving us this great offer and supporting Gunboards!![/QUOTE]
Reply With Quote
  #10  
Old 10-13-2009, 03:54 PM
mmashburn mmashburn is offline
Junior Member
 
Join Date: Sep 2009
Posts: 12
Default

just got 4 cans
Reply With Quote
  #11  
Old 10-15-2009, 04:22 PM
Tractor_Boy's Avatar
Tractor_Boy Tractor_Boy is offline
Senior Member
 
Join Date: Nov 2008
Location: Arnold, MD
Posts: 140
Send a message via AIM to Tractor_Boy Send a message via MSN to Tractor_Boy Send a message via Yahoo to Tractor_Boy
Default

is this GB still active?
Reply With Quote
  #12  
Old 10-15-2009, 06:45 PM
pentium's Avatar
pentium pentium is offline
Senior Member
 
Join Date: Dec 1969
Posts: 326
Talking Yes, it is active.

Yes, this is an active group buy. It doesn't go out until the supplier gets 100 cans worth of order.

I may up my order, so get in now while you can.
__________________
Feed me blood, for I am thirsty!
Reply With Quote
  #13  
Old 10-15-2009, 07:04 PM
Tractor_Boy's Avatar
Tractor_Boy Tractor_Boy is offline
Senior Member
 
Join Date: Nov 2008
Location: Arnold, MD
Posts: 140
Send a message via AIM to Tractor_Boy Send a message via MSN to Tractor_Boy Send a message via Yahoo to Tractor_Boy
Default

I think I'll jump on the band wagon and probably end up with 4 by the time its all said and done............ COME ON PAYCHECK!
Reply With Quote
  #14  
Old 10-15-2009, 11:08 PM
Vulture Vulture is offline
Senior Member
 
Join Date: Dec 1969
Posts: 164
Default

I just put in a purchase for one box.
Reply With Quote
  #15  
Old 10-16-2009, 07:24 AM
MP5 MP5 is offline
Member
 
Join Date: Jun 2009
Posts: 68
Default Were at 70 cans, 30 to go - MP5

Were at 70 cans right now. Will start shipping next week.
Thanks Guys - MP5 -
Reply With Quote
  #16  
Old 10-16-2009, 08:59 AM
mmashburn mmashburn is offline
Junior Member
 
Join Date: Sep 2009
Posts: 12
Default

how far can you make a can of this stuff go if you are a moderate shooter?

Last edited by mmashburn; 10-16-2009 at 09:00 AM. Reason: .
Reply With Quote
  #17  
Old 10-17-2009, 05:42 AM
gun_nut_73's Avatar
gun_nut_73 gun_nut_73 is offline
Senior Member
 
Join Date: Dec 1969
Posts: 1,033
Default

Please put me down for one can. (I wanted two, but just got hit with a big auto repair bill)
Reply With Quote
  #18  
Old 10-17-2009, 10:31 AM
NY50/70 NY50/70 is offline
Senior Member
 
Join Date: Apr 2009
Posts: 246
Default

MP5-
<<<Were at 70 cans right now. Will start shipping next week.>>>

In a few years will we be saying, I remember when you could buy this for 11 cents a round delivered, wish I had bought more?
Reply With Quote
  #19  
Old 10-17-2009, 02:00 PM
Bruce Hair Willis Bruce Hair Willis is offline
Senior Member
 
Join Date: Jul 2009
Posts: 105
Question

I just got an email saying that my order is in dealer processing stage, but It says I got charged 165...I entered the correct coupon code and still got charged for shipping, I don't mind but I'm not sure if the coupon code is working?
__________________
Collecting 91/30's in unissued condition
Reply With Quote
  #20  
Old 10-17-2009, 05:24 PM
MP5 MP5 is offline
Member
 
Join Date: Jun 2009
Posts: 68
Default PM me your order number and I will fix it - MP5

We do have several direct orders from Non GunBoard customers. PM me your order number and I will fix it. MP5/Military Shooters
Quote:
Originally Posted by Bruce Hair Willis View Post
I just got an email saying that my order is in dealer processing stage, but It says I got charged 165...I entered the correct coupon code and still got charged for shipping, I don't mind but I'm not sure if the coupon code is working?
Reply With Quote
  #21  
Old 10-18-2009, 09:54 AM
NY50/70 NY50/70 is offline
Senior Member
 
Join Date: Apr 2009
Posts: 246
Default

My total was correct.
Reply With Quote
  #22  
Old 10-23-2009, 05:33 AM
johnnyde johnnyde is offline
Junior Member
 
Join Date: Oct 2009
Posts: 1
Default

Quote:
Originally Posted by MP5 View Post
Apples and oranges. Sportsman guide sells Romanian cans of a lesser quainity. - MP5

I realize your just trying to make some sells like a regular retailer, but the Romanian surplus is good stuff. It's thirty years newer than this Polish ammo, and more dependable. And to say that the Polish ammo your selling will have no cracks while other Polish ammo on the market from the same time period will is kind of ignorant. It all comes from the same place/time/manufacturer. It's cheaper to get a C&R license and buy this Polish stuff straight from Century Arms who imports it to begin with. Less than $100 for one tin shipped.
Reply With Quote
  #23  
Old 10-23-2009, 05:56 PM
MP5 MP5 is offline
Member
 
Join Date: Jun 2009
Posts: 68
Default The first batch of 50 cans were shipped today - Yours can be next!

I beg to differ Johnnyde. The Polish 7.62x25 ammo that CIA is selling is stated as being cracked because it comes from a known lot that has this defect.

The ammo we are selling will not come from this defective lot, It has been inspected by the importer and us. It shows no crack defects. It is 100% surefire.

CIA did not bring over all of the 7.62x25 from Poland, there are several other importers working that area.

CIA knows what they have, they bought it cheap to sell it cheap. I think it is an error to call the members of the board ignorant. You get what you pay for in this world, there are no free rides.

If you want to try a can of the Polish and make an informed judgement to post on the boards, jump in and get a can with the group buy.

Regards - MP5 - Military Shooters LLC
Reply With Quote
  #24  
Old 10-23-2009, 11:11 PM
NY50/70 NY50/70 is offline
Senior Member
 
Join Date: Apr 2009
Posts: 246
Default

Got the shipped notice on mine today.

Ready to run some through when it gets here.
Reply With Quote
  #25  
Old 10-24-2009, 10:39 AM
MP5 MP5 is offline
Member
 
Join Date: Jun 2009
Posts: 68
Default

Glad to hear that the UPS shipping notification system is working correctly. Please post your opinon on th Polish 7.62x25 when tou get a chance - MP5
Reply With Quote
  #26  
Old 10-24-2009, 06:34 PM
TDRacing13 TDRacing13 is offline
Member
 
Join Date: Mar 2009
Posts: 62
Default

got my shipping notification yesterday. Thanks again for supporting gunboards!
Reply With Quote
  #27  
Old 10-27-2009, 02:50 AM
Bruce Hair Willis Bruce Hair Willis is offline
Senior Member
 
Join Date: Jul 2009
Posts: 105
Thumbs up

I got my can a few days ago and I can confirm after opening 3 boxes-----there are no cracks in this ammo... However, There was a few that had some small spots of rust, but I don't think that will affect it much as I've shot ammo that looks worse with no problems...Except for the one I just found:

Now, I don't know if showering in a bathroom about 10 feet away that's separated by a doorway would be enough to cause this much rust over 3 days....but so far this is the only cartridge I've found that looks like this.
I will be examining the rest of it for the rest of the night now.
Upon scraping it with a knife, it appears to not be internal so far...
I'm going to sacrifice this bullet to see if the rust is internal...

Conclusion by someone who has never examined what a rusted through bullet casing looks like:
It does not seem to go internally, and if it does----it's not noticeable due to the fact that the inside is not polished (of course).

Of three boxes I've opened so far, after examining every bullet, I've noticed that a lot of them have TINY spots of rust...but that's to be expected with surplus, I've found 3 *Plus the one in the picture* that I wouldn't fire, One of them looks safe but I'm being cautious. The other two have rust that goes from the shoulder to the bullet

All in all, so far so good. Looks to be above average in consistency, I know where I'll be buying my tokarev ammo.
Still need to shoot it though

Last edited by Bruce Hair Willis; 10-27-2009 at 07:36 PM.
Reply With Quote
  #28  
Old 10-27-2009, 10:35 PM
Morning Wood Morning Wood is offline
Senior Member
 
Join Date: Oct 2007
Posts: 149
Default

It all depends on the crimp. If it has the 3 dimple crimp, it will most likely have cracks. If it has the compression crimp (similar to lee factory crimp die), it will not have cracks. The cracks are almost microscopic. Most only show under magnification. Until you shoot it, that is


PLEASE...... post pix of your tin lids. It's one of my small related side hobbies recording the different lots of this stuff.

Last edited by Morning Wood; 10-27-2009 at 10:46 PM.
Reply With Quote
  #29  
Old 10-27-2009, 11:28 PM
TDRacing13 TDRacing13 is offline
Member
 
Join Date: Mar 2009
Posts: 62
Default

on a side note what would be the best method of longer term storage for this ammo. i already have an open tin of romanian so i wont be shooting this for a while. I leave all my ammo in spam cans normally before i need them then trransfer it to dry storage boxes after opening. I know its been in these tins for 5o years but i didnt know if the dry storage boxes were better
Reply With Quote
  #30  
Old 10-28-2009, 12:01 AM
Bruce Hair Willis Bruce Hair Willis is offline
Senior Member
 
Join Date: Jul 2009
Posts: 105
Default

Quote:
Originally Posted by Morning Wood View Post
It all depends on the crimp. If it has the 3 dimple crimp, it will most likely have cracks. If it has the compression crimp (similar to lee factory crimp die), it will not have cracks. The cracks are almost microscopic. Most only show under magnification. Until you shoot it, that is


PLEASE...... post pix of your tin lids. It's one of my small related side hobbies recording the different lots of this stuff.
It has a 4 dimple crimp...I don't know what a crimp is since I'm not a reloader and my knowledge is more along the lines of gun function....but I'm guessing that a crimp on a bullet means a part of the casing that is elevated or pushed in due to the other parts of the casing being squeezed together around a bullet.

Last edited by Bruce Hair Willis; 10-28-2009 at 12:14 AM.
Reply With Quote
  #31  
Old 10-28-2009, 08:19 AM
NY50/70 NY50/70 is offline
Senior Member
 
Join Date: Apr 2009
Posts: 246
Default

Got my case yesterday.

If the weather clears up I hope to try some next Monday.
Reply With Quote
  #32  
Old 10-28-2009, 12:55 PM
Morning Wood Morning Wood is offline
Senior Member
 
Join Date: Oct 2007
Posts: 149
Default

Quote:
Originally Posted by Bruce Hair Willis View Post
It has a 4 dimple crimp...I don't know what a crimp is since I'm not a reloader and my knowledge is more along the lines of gun function....but I'm guessing that a crimp on a bullet means a part of the casing that is elevated or pushed in due to the other parts of the casing being squeezed together around a bullet.
The bullet is actually held in by neck tension (bullet a few thou larger then the opening in the case). Sometimes though, this is not enough to keep the bullet from being pushed back while cycling from the mag to the chamber, so the crimp is an extra measure to secure it. Now a days, when we think of crimping, it usually means a roll or taper crimp performed when seating a bullet in the seating die, or using a lee "factory crimp" die. All of these crimp the entire circumference of the case into the bullet. Back then, the Polish (among others) thought it might be a good idea to just ping a few indentions around the case neck which caused metal stresses in cases that were already brittle anyway. Most of the cracks in the polish ammo we have today are through those indentions. But there also cracks that are not. This means that we have two factors at work here. Brittle brass and 3/4 point crimps.

It's completly possible the the brass lot in this ammo group buy was malleable enough to withstand the point crimp and remain uncracked for nearly 60 years. Which I hope is the case here. I haven't had any from your lot (as displayed in pic), so I can't really expound on this particular lot. But I wish you the best of luck with it. But if the group buy admins say it is uncracked, I would tend to trust what they say.

and BTW, Thank you for the picture. I have saved a copy for future reference. I'm sure there will be many posts about it's performance.
Reply With Quote
  #33  
Old 10-29-2009, 07:03 PM
TDRacing13 TDRacing13 is offline
Member
 
Join Date: Mar 2009
Posts: 62
Default

Just got my tin today! Debating on opening it since it wont be used for a bit. thanks again
Reply With Quote
  #34  
Old 10-29-2009, 08:39 PM
Morning Wood Morning Wood is offline
Senior Member
 
Join Date: Oct 2007
Posts: 149
Default

Quote:
Originally Posted by TDRacing13 View Post
Just got my tin today! Debating on opening it since it wont be used for a bit. thanks again

Pix, please?
Reply With Quote
  #35  
Old 10-29-2009, 10:37 PM
NY50/70 NY50/70 is offline
Senior Member
 
Join Date: Apr 2009
Posts: 246
Default

Here are the pics of my can and a couple of the boxes.

The cases are nice and bright with a 3 dimple crimp.

Cases are stamped 54 and 343 in an oval.

I guess this stands for 1954 and a factory number?

Hope to shoot some next week if the rain stops.

I am considering buying a boat, something around 300x50 cubits.
Attached Images
File Type: jpg DSCF0001.jpg (302.1 KB, 28 views)
File Type: jpg DSCF0002.jpg (298.0 KB, 24 views)
File Type: jpg DSCF0006.jpg (329.9 KB, 34 views)
Reply With Quote
  #36  
Old 10-30-2009, 11:23 PM
TDRacing13 TDRacing13 is offline
Member
 
Join Date: Mar 2009
Posts: 62
Default

Quote:
Originally Posted by Morning Wood View Post
Pix, please?
Ill try and post pics tomorrow. I need to upload them
Reply With Quote
  #37  
Old 10-31-2009, 05:41 PM
gun_nut_73's Avatar
gun_nut_73 gun_nut_73 is offline
Senior Member
 
Join Date: Dec 1969
Posts: 1,033
Default

My shipment arrived Thursday, within a couple of days of order, even though Colorado was having the worst storm in 10 years. Spam can was tight, with no damage. Ammo is clean and looks fresh.

Many thanks to MP5 for putting this together for us.

PS: My tin is marked 63-54- "343 in an oval"

Last edited by gun_nut_73; 10-31-2009 at 05:44 PM.
Reply With Quote
  #38  
Old 10-31-2009, 05:47 PM
gun_nut_73's Avatar
gun_nut_73 gun_nut_73 is offline
Senior Member
 
Join Date: Dec 1969
Posts: 1,033
Default

Quote:
Originally Posted by TDRacing13 View Post
on a side note what would be the best method of longer term storage for this ammo. i already have an open tin of romanian so i wont be shooting this for a while. I leave all my ammo in spam cans normally before i need them then trransfer it to dry storage boxes after opening. I know its been in these tins for 5o years but i didnt know if the dry storage boxes were better
Just my opinion here: If the can is still sealed and good condition, you can leave it as it is. If you just can't resist pulling the tab, then transferring the boxes to a US military ammo can with a small desiccant packet will keep the ammo for a LONG time. US ammo cans have gaskets that make a good seal.
Reply With Quote
  #39  
Old 10-31-2009, 09:49 PM
Morning Wood Morning Wood is offline
Senior Member
 
Join Date: Oct 2007
Posts: 149
Default

Quote:
Originally Posted by gun_nut_73 View Post
Just my opinion here: If the can is still sealed and good condition, you can leave it as it is. If you just can't resist pulling the tab, then transferring the boxes to a US military ammo can with a small desiccant packet will keep the ammo for a LONG time. US ammo cans have gaskets that make a good seal.
I don't think I've found a polish tin that was airtight yet, though I still leave most of them unopened
Reply With Quote
  #40  
Old 11-01-2009, 03:56 PM
gun_nut_73's Avatar
gun_nut_73 gun_nut_73 is offline
Senior Member
 
Join Date: Dec 1969
Posts: 1,033
Default

Quote:
Originally Posted by Morning Wood View Post
I don't think I've found a polish tin that was airtight yet, though I still leave most of them unopened
I guess mine was the exception then. There was a definite feel of an airtight seal being broken when I opened mine. The inside showed absolutely no sign of rust or corrosion. The only sign of age was that the cardboard had started to split on a couple of corners.

I am very pleased with the can I got, and wish i could afford a truckload of it.
Reply With Quote
  #41  
Old 11-01-2009, 08:49 PM
TDRacing13 TDRacing13 is offline
Member
 
Join Date: Mar 2009
Posts: 62
Default

Yea I had planned on keeping in the tin like the rest of my surplus i have squirreled away. Here's a picture of the tin sorry about the quality its from my phone.
Attached Images
File Type: jpeg ttammo.jpeg (17.0 KB, 17 views)
Reply With Quote
  #42  
Old 11-04-2009, 10:38 PM
MP5 MP5 is offline
Member
 
Join Date: Jun 2009
Posts: 68
Default Group Buy Will End 11-30-09

Just a heads up, We will be ending the group buy on the Polish 7.62x25 ammo on 11-30-09. If your considering getting in, don't sit on the fence too long.- MP5
Reply With Quote
  #43  
Old 11-06-2009, 11:38 PM
The Mr Mitch's Avatar
The Mr Mitch The Mr Mitch is offline
Senior Member
 
Join Date: Dec 1969
Location: Hodgenville, Ky
Posts: 698
Default

I just ordered a can of it. Good deal.
__________________
*The gun at my side means that I cannot be forced, only persuaded. I don't carry it because I'm afraid, but because it enables me to be unafraid.*

USMC 1959-1963
Reply With Quote
  #44  
Old 11-07-2009, 01:03 AM
Tractor_Boy's Avatar
Tractor_Boy Tractor_Boy is offline
Senior Member
 
Join Date: Nov 2008
Location: Arnold, MD
Posts: 140
Send a message via AIM to Tractor_Boy Send a message via MSN to Tractor_Boy Send a message via Yahoo to Tractor_Boy
Default

I want some, but unsure whether I will still have anything that uses this ammo........

these troubled economic times are being pretty hard on me... already sold my Tok.... now getting offers on my CZ.52......
Reply With Quote
  #45  
Old 11-08-2009, 05:25 AM
MP5 MP5 is offline
Member
 
Join Date: Jun 2009
Posts: 68
Default CZ52 and ammo confrontation

What kind of offers are you getting for your CZ52, I have guys asking for them all the time. Maybe we can send somebody your way to help you out. Regards - MP5
Quote:
Originally Posted by Tractor_Boy View Post
I want some, but unsure whether I will still have anything that uses this ammo........

these troubled economic times are being pretty hard on me... already sold my Tok.... now getting offers on my CZ.52......
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:53 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
2008-2009 The Mosin Nagant Company