Bergman M1910 Cocking Issue - Hammer Needed
Results 1 to 3 of 3

Thread: Bergman M1910 Cocking Issue - Hammer Needed

  1. #1
    Join Date
    Dec 1969
    Location
    Mass
    Posts
    686

    Default Bergman M1910 Cocking Issue - Hammer Needed

    I just picked up an early Danish M1910. Really nice exterior but was fired a lot. The cocking stud and hammer are both very worn and it doesnít want to cock when the bolt is pulled back. No problem manually cocking it. Not sure if that is normal on the earlier M1910 or if I need to look for a new hammer.

    UPDATE:
    After some testing, the nose of the hammer is indeed the problem. If anyone has a spare or knows where I might find one,the help would be hugely appreciated.


    Thanks,
    Eric
    Last edited by hatrick; 01-27-2019 at 06:53 PM.

  2. #2
    Join Date
    Dec 1969
    Location
    Mass
    Posts
    686

    Default

    Back to top

  3. #3

    Default

    You might call Jack First gun parts and ask if they can repair it as I doubt you will ever find another hammer.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •